The failure of the juice vending machine and the maintenance method

In recent years, due to the advancement of production technology of domestic juice vending machine enterprises, the failure rate of juice vending machines has dropped significantly compared with the previous two years, but it is impossible for large-scale mechanical equipment such as juice vending machines to fail. What are the reasons for the failure of the orange juice vending machine?

First, fresh juice vending machine card goods

Due to the use of spring spirals, the spring rotation will produce a pressing force on the goods when the machine is shipped. The pressing force has a positive and oblique pressing force. Under the action of the positive pressing force, the goods are easy to trip and even It is falling down. This will cause the goods to be stuck under the goods (below the spring);

Solution:

First remove the jammed item, and then enter the "fault" item in the juice vending machine management page to select the clear card cargo failure. And in the future business, the corresponding changes in the placement of goods, mainly the size of the main goods should be as close as possible to the size of the goods, not too small and can not be harder than the size of the spring!

Second, the Automatic Juice Vending is out of stock, no change.

The main reasons for this situation are:
1. There is no change in the changer;
2, there is change in the changer, the default change in the system is zero;
3, the changer card currency;
4. The dust of the banknote is too serious.

Solution:
1. Make up the change;
2, enter the system management page, check whether it is not recorded after the last change (the partial vending machine needs to manually input the amount of change after the change), if the quantity is 0, please modify;
3. Unpack the banknote and take out the jammed currency;
4. Unpack the banknotes and carefully clean the dust with a brush or send it back to the factory for cleaning.

Third, the Fresh Fruit Juice Vending Machine puts in change, the change does not enter the changer, but instead deposits into the collection area.

Most of the problems occurred due to the error of the banknote system (there was no shutdown for a long time).

Solution:
After turning off the power, turn on the system management page after three minutes, then use a small stick to go into the reset button of the banknote to reset it. After inserting the small stick and pressing the reset button, you will see the light of the banknote light on and off and then on. Just let go) Wait a few minutes to shut down, and then reboot again basically solve the problem!

Fouth, the light of the banknote mouth of the juice vending machine is not bright or flickering, and the banknotes are not put in.

There are two possibilities for such problems: 1. Due to foreign matter in the banknote, 2, the iron cash box under the banknote is not installed.

Solution:
Open the banknote device, turn off the foreign object, then turn it off, then turn it on again, turn off the power of the machine. Reinstall the iron cash box!

Five, scan code payment success does not ship

Solution:
This is caused by signal instability, and the signal line is pulled to sell the detection signal outside the freighter.

The above is Cookeryaki to introduce the failures and maintenance methods of juice vending machines. If you want to know other related knowledge, you can click on our official website to consult us, or you can directly contact us online, or call us and stay. Next time you call, we will respond to you in time.